LEDs provide high quality, strong directional light – best for accent lighting, or lighting surfaces directly under the fixture. LEDs are generally at least twice as efficient than conventional incandescent bulbs, though as much as half as efficient as compact fluorescents. They are suitable for use in locations where bright, ambient light is not required and/or lamp maintenance is difficult.
This LED 6" diameter recessed can with an adjustable trim/lamp kit offers warm white LEDs, a dimmable integral power module, and an optimum light distribution pattern. Since LEDs contain no mercury, and use little electricity, they are exceptionally environmentally friendly.
With this downlight the adjustable lamp/trim (included) pivots to provide up to 30 degrees of tilt for slight adjustable illumination. The frosted acrylic lens provides a 30 degree beam spread, 2750 degree Kelvin color temperature, while consuming only 12 watts of electricity.
The recessed can housing is may be installed in ceilings from 1/2" to 2-1/2" thick over a 6 7/8" diameter ceiling opening. It has a heavy duty mounting frame, and is UL & CUL listed for damp locations. If desired the removable trim ring may be painted to match the ceiling finish.
- Electrical Specifications: 120 VAC, 50-60 Hz, 450 mA, 15 watts
- Light Output: 200-480 lumens*
- Operating Temperature: 32 to 120 degrees Fahrenheit (0 to 50 degrees C)
- Rated Life: 30,000 hours
- Housing Dimensions: 7.5" depth, 7.9" wide, 10.75" long
- Ratings: Titles 22 & 24 (CA)
- Origin: United States
* The light output range reflects the inadequacies of the testing protocol for LED fixtures. LED light output is measured at a cooler operating temperature (25 deg. C) than is likely to be experienced in actual use (60 deg. C). Since LEDs perform best in cool environments, and further light losses occur when LEDs are clustered together, the actual amount of delivered light is going to be lower than the tested lumens.
Additional Information: P87 Housing Specification Sheet (pdf)
Additional Information: P8059-30 Specification Sheet (pdf) |
|
|
|
