eW™ MR is a compact lamp for MR16 fixtures and sockets. It is well-suited for tracks, rails, cables, and pendant fixtures in interior architectural, retail, exhibit, and display applications. The eW MR lamp uses a standard GU5.3 base and MR16 two-pin connectors so it is a great LED replacement for less energy-efficient, hotter, conventional lamps. Its high-intensity LED package and custom optics are an easy upgrade that fit most standard low-voltage MR16 light fixtures.
It uses a high quality energy efficient LED and vacuum-matalized reflectors behind a clear tempered glass lens to produce a warm white light that draws less than 5 watts of electricity. The beam angle is 25 degrees. With a rated life of 50,000 hours it will last far longer than a standard MR16 halogen bulb.
- Electrical Specifications: 12 volts AC, 4.8 watts
- Light Output: 40 lumens
- Base: GU5.3
- Rated Life: 50,000 hours
- Color Temperature: about 2,700 degrees Kelvin
- Minimum Start Temperature: -4 degrees Fahrenheit (-20 degrees C)
- Maximum Operating Temperature: 122 degrees Fahrenheit (50 degrees C)
Additional Information: Specification Sheet (pdf)
Additional Information: Track Fixture Compatibility (pdf)
Note: This lamp is not suitable for use on dimming circuits, and is not compatible with all MR16 fixtures. See the last page of the specification sheet referenced above or the Track Fixture Compatability document for more information. Some electronic transformers used to drive MR16 lamps may not be compatible with LED MR16s because the minimum load rating of the tranformer can be higher than the energy consumption of the LED. Symptoms of incompatibility include no light output, flickering, or random shutdown. The transformer output requirements should be 10 to 13 Volts at 40-60 Hertz, with a minimum load rating equal to or lower than the power consumption of the LED MR16 to be installed. |
|
|
|
