This AEP Window Panel will cover an area up to 36" x 36". The sturdy aluminum frame mounts on the indoor side of existing windows. The weatherstripping around the perimeter of the frame seals the window, elimiting drafts and creating a thermal barrier. The frame has two separate surfaces (front and back) of clear, flexible glazing material with a 7/16" pocket of air between them. When the panel is in place a second air pocket is created between the Advanced Energy Panel and your existing window. If properly installed in conjunction with a single pane window, an AEP panel can lower the U-factor to around 0.31. (The lower the U-factor, the better the window is at limiting heat loss. Single pane windows typically have a U-factor from 1.1 to 0.94, with double glazed windows having U-factors from .39 to .48, and triple glazed windows having U-factors from 0.27 to 0.38.)
All hardware is included. With the right tools (see below) a kit can generally be built in a few hours (depending on your abilities). It has a 10 year limited manufacturer warranty.
The kit contents include:
4 Framing Rails aluminum
4 Gaskets for corners
4 Corners
1 Roll of poly film enough for 3 sides
8 Lengths of ez press in spline
5 Lengths of self adhesive weather stripping
Selection of mounting hardware 3 types of mounts included
1 Combination marking, cutting and film trimming guide
Instructions
To assemble a kit you will need a large, flat surface to work on, with the following tools:
Hack Saw
Small File
Rubber Mallet
Tape Measure or Folding Rule
Spline Roller (with concave edge)
Scissors
Blow Dryer
IMPORTANT: Items on this page are only available while supplies last.
